What kind of cut-edge mold is suitable for those products?

The upper mold includes the punch handle, the punch plate, the fixed plate, the upper unloading block, the lower mold including the lower mold, the lower mold, the lower mold and the lower part A positioning plate and a pressure plate, wherein the pneumatic mold device and the pneumatic discharge device are respectively arranged in the upper and lower molds, and the punch and the die are simultaneously mounted on the lower mold. The trimming die of this product changes the vertical pressure of the punch into horizontal pressure to remove excess material from the metal or non-metallic circular or rectangular housing parts. At the same time the use of compressed air as the driving force to push the press to suppress the need to process the parts, processing is completed, the mold down mold installed pneumatic discharge device unloading parts. Can reduce the labor intensity of workers, reduce processing time, improve economic efficiency.

The main structure of the product is simple, easy to operate, the use of continuous pressure on the module through the hydraulic press, so that the module on the concave die to complete the die-casting The surface of the slag package, the flow channel and the removal of excess flash work, but also through the punch, red castings for the core hole to deburring, eliminating the previous manual deburring tedious steps, the effective realization of large quantities of die casting Pieces of trimming work.