Die-casting products trimming die can protect the product does not deformation O

The die-cutting product comprises a movable die and a fixed mold, the movable mold is provided with a movable module, a fixed module is arranged on the fixed mold, the movable module is arranged with the upper and lower of the fixed module, the product groove is arranged on the module, There is a knife that corresponds to the edge of the product groove. The utility model is characterized in that when the product is placed in the product groove of the module, when the moving module is closed and the module is closed, the cutter on the moving module will remove the material from the edge of the product, and after the separation module is separated from the module , Can remove the products within the product groove, not only cut off the high efficiency, and can be through the groove limit and the movement module and the module closed to protect the product is not deformed, and greatly reduces the labor intensity, low labor costs.

A high-life trimming die comprising a hydraulic press, a male mold, a die, and a dies which are vertically opposed to the recesses of the die and are vertically and out of the groove; on the four sides of the lower end face of the male mold and the recess Four sides, set the cobalt chrome tungsten material electrode, in the center of the concave die groove, with hydraulic or elastic control, can be pressed down or reset the positioning block, convex mold, concave mold, positioning block made of 45 steel, Up and down mold life, and when the mold wear, can be carried out twice to many times welding cobalt chromium tungsten material electrode, a set of mold when the use of multiple sets of molds, low cost, trimming quality.